Baja Kits - Stock Length Upper Arm | 19+ Silverado/Sierra 1500 4WD

$1,599.00

Compatible with the New 2022+ ZR2/AT4 * Description Our computer designed upper a-arm uses a fabricated, boxed arm design for ultimate strength. It allows significantly more wheel travel over stock when...

Vendor: Baja Kits
SKU: BJK1111003
Availability : In Stock Pre order (We ship containers from the USA Monthly) Pre-order (6-8 Weeks from USA or Airfreight for 7-10 day delivery)

07 5500 0095 - Need help with product selection or delivery options?

  • Compatible with the New 2022+ ZR2/AT4 *
Description

Our computer designed upper a-arm uses a fabricated, boxed arm design for ultimate strength. It allows significantly more wheel travel over stock when paired with an extended length, bolt in, aftermarket shock and we've built more caster into all of our Upper arms to give your truck the on road stability needed anytime a truck is lifted from its factory ride height. We use Trophy Truck grade uni-balls to replace the weak, stock ball joints, giving you maximum articulation and performance in the dirt with your 2WD or 4WD Silverado. These will also work great with your existing lift kit that most likely has maxed out the stock ball joint angle. (Rear kits available too).


The Baja Kits Advantage:
- CAD designed boxed UCA
- Our custom Hi-Density Custom Bushings with grease fittings offer industry leading durability and a quiet, no squeak ride
- 1" Hi angle Trophy Truck grade uni-ball's replace the weak stock ball joints that fail under high angles and loads seen from normal offroad use
- Our CNC machined corrosion resistant misaligns have a tapered snout to adapt your stock upright/spindle with ease
- We've increased the caster angle that you lose when lifting a truck with stock arms to regain on road stability, handling and alignment


Technical Specs:
Track Width - Stock width
Lift - 0-3"

Product Requirements:
Shocks - Aftermarket Replacement 2.5 or 3.0 Shocks
Tire Size 35" are recommended for most with slight trimming.
Wheel Size - 17" rim with 4.75" max backspacing


Parts Included:
**Kits come pre-assembled and ready for install, as seen in product photos**

Boxed Upper Arms
- Baja Kits Badges & Rivets
- Hi-Density Custom Bushings
- Crush Sleeves
- Zerk fittings
- 1" uni-balls
- Countersunk Heat Treated Top Cap Misaligns & 12 point bolts
- Heat Treated Tapered Misalign Adapters

Additional Items
- Install Guide
- Baja Kits Sticker pack


Install Information:
- Level 1 Installation, Bolt on
- Install Time: 2 hours (Times will vary depending on knowledge and skill level)
  1. Control arms typically add 1-2 degrees caster above stock alignment specifications.
  2. Ball joint used is 081203, use this for replacement purposes if a new ball joint is ever needed. Ball joint is directional and must be installed with the 'dot' facing either inward or outward on the vehicle, otherwise damage may occur.
  3. The BDS121260 UCA will work for stock height vehicles. These BDS121260 UCA will work with most leveling kits, such as the 2" ZONE leveling kits and all 4" and 6" BDS kits, along with 4" Trail Boss or AT4 kits.
  4. Will not work with ARC.  Use BDS121261 for the 4" and 6" ARC kits.
  5. Use a maximum of 5.5" BS wheel for tire clearance to the upper ball joint when used on 2-3.5" kits. Can be used on 4-6" BDS kits with 6.25" BS (Factory) Wheel.

Download guide Download guide 1

  • Bushing Material : Rubber
  • Bushings Included : Yes
  • Grease Fitting Included : Yes
  • Lift Height : 2-3"